GW5 Isolation Switch

GW5 outdoor MV isolating switch is used for three-phase AC 50Hz outdoor high voltage electrical equipment, used for the line to switching under voltage pressed no load condition, and electrical isolation the maintenanced high voltage bus, circuit breakers and other electrical equipment and charged high voltage line, can also be used for the opening and closing small capacitance or inductance current. When the knife in the normal break position, can provide a insulation distance consistent with safety requirements. Widely used in 35~110kV substation.

Selection

Operating conditions

1. The ambient temperature: upper limit +40℃,lower limit -40 ℃;
2. Altitude: no more than 3000m;
3. Wind speed: not more than 35m/s;
4. Earthquake intensity: do not exceed 8 degree;
5. Pollution level: no more than III;
6. No severe vibration, no corrosive gas, no fire, no explosion danger place.

Technical data

Overall and mounting dimensions(mm)

1. Connecting terminal

The main knife handle at the closing position

The main knife handle is in the off position

Earthing switch operation handle is in the closing position

Earthing switch operation handle is in the off position